Journal of Electromyography and Kinesiology
Volume 15, Issue 5 , Pages 507-515, October 2005

Orthotic effect of a stabilising mechanism in the surface of gymnastic mats on foot motion during landings

Institute for Biomechanics and Orthopaedics, German Sport University Cologne, Carl-Diem-Weg 6, 50933 Cologne, Germany

Received 10 August 2004; received in revised form 30 November 2004; accepted 15 December 2004. published online 21 February 2005.

Abstract 

The purpose of this study was to examine two hypotheses: (a) mat hardness affects foot motion during landing; (b) the influence of a surface stabilising interface integrated in a mat on foot motion is detectable. Two studies were carried out: In the first one, six female gymnasts performed barefoot landings from different falling heights onto three mats having different hardness. In the second study, a stabilising mechanism was integrated in the surface of three new mats with different hardness. Three high speed video cameras (250Hz) captured the motion of the left leg and foot. These were modelled by means of a four rigid body system. The maximal eversion at the ankle joint was not influenced by the different mats (hard: 4.6°±1.9 to 9.3°±3.4, medium: 3.1°±2.7 to 7.4°±3.5, soft: 4.8°±2.1 to 8.4°±3.5). The soft mat without the stabilised surface showed higher eversion values (p<0.05) between forefoot and rearfoot (medial joint: hard: 5.1°±3.2 to 7.3°±3.3, medium: 6.9°±3.1 to 7.5°±2.9, soft: 12.7°±4.1 to 13.4°±3.3; lateral joint: hard: 8.5°±3.1 to 9.7°±1.1, medium: 9.5°±2.6 to 11.2°±3.3, soft: 12.1°±2.3 to 15.7°±3.3). For the mats with the surface stabilising interface, the different hardness did not cause any significant differences in maximal eversion values at the medial (hard: 1.5°±3.3 to 5.5°±4.5, medium: 1.3°±3.5 to 5.1°±3.6, soft: 0.7°±4.9 to 5.4°±4.2) nor at the lateral (hard: 11.3°±4.2 to 17.3°±4.2, medium: 12.3°±4.8 to 17.1°±3.7, soft: 11.5°±4.6 to 17.1°±4.3) forefoot joints. The structure of the mat and the consequent deformation hollow did not influence the kinematics of the ankle joint during landings, but it influenced the motion at the medial and the lateral forefoot joints. By means of a stabilised surface, it is possible to reduce the influence of mat deformation on the maximal eversion between forefoot and rearfoot.

Keywords: Modelling, Rearfoot kinematics, Forefoot kinematics, Eversion, Mat deformation

To access this article, please choose from the options below

Login to an existing account or Register a new account.

  • Purchase this article for 31.50 USD (You must login/register to purchase this article)

    Online access for 24 hours. The PDF version can be downloaded as your permanent record.

  • Subscribe to this title

    Get unlimited online access to this article and all other articles in this title 24/7 for one year.

  • Claim access now

    For current subscribers with Society Membership or Account Number.

  • Visit SciVerse ScienceDirect to see if you have access via your institution.
 

PII: S1050-6411(05)00013-1

doi:10.1016/j.jelekin.2004.12.002

Journal of Electromyography and Kinesiology
Volume 15, Issue 5 , Pages 507-515, October 2005